UM10-Finished Wall Mounted Corner Guards.  Fabricated of #18 gauge, type 304,18-8 alloy stain less steel with #4 satin finish and vinyl protective coating on all exposed surfaces. Outside edge shall be slightly radiused. Corner guards are mounted with adhesive (not supplied with unit) but can be pre-drilled (use suffix—S) for screw mounting by means of 1/4” diameter screws.
Overall Size: 3-1/2”x 3-1/2” x 40”H
 

UM11–Specifications same as above.
Overall Size: 4” x 4” x 52”H

UM25–Door Jamb Protectors. Protects door jambs from scratches. Unit is #18 gauge stainless steel. Similar fabrication to the UM10 and UM11.
Overall Size: 1” x 1” x 40”
 

UM20–Rough Wall Mounted Stainless Steel Comer Guard. Fabricated of #18 gauge, type 304, 18 8 alloy stainless steel with a #4 satin finish and vinyl protective coating on all exposed surfaces. Outside edge shall be rounded to a ¹⁄₂” radius. Ends of corner guards are bent in and returned to wall and have 1” long mounting legs at each end. Mounting legs are pro vided with mounting holes for ¹⁄₄” screws 16” on center.
Overall Size: 3-3/4”x 3-3/4” x 40”H
 

UM21–Specifications same as above.
Overall Size: 4-1/4”x 4-1/4” x 52”H

UM15–Stainless Steel Kick-Plate. Fabricated of #18 gauge, type 18-8 stainless steel, satin finished. For doors, under wheelchair lavatories and every other wall area where traffic is heavy. Plate has rounded corners. It is fabricated with 6 screw mounting holes.
Overall Size: 8”H x 30”W
 

UM16–Stainless Steel Kick-Plate. Fabricated of #18 gauge type 18-8 stainless steel, satin finished. For doors, under wheelchair lavatories and every other wall area where traffic is heavy. Plate has rounded corners. Kick-plates are mounted with adhesive (not supplied with unit) for permanent installation.
Overall Size: 8”H x 30”W
 

*Other sizes are available on request for corner guards and kickplates.