HAND/HAIR DRYERS

JETAIR™ Hand and Hair dryers
for years of reliable operation without the need of replacing brushes

U1525 U1525EA

U1525 - Hand/Hair Dryer - push button activation, white nylon finish.*

U1525EA - Hand/Hair Dryer - automatic, hands-free activation, white nylon finish.*

Available voltages: 110-120, 220-240, 277
Available colors: White, Beige, Almond, Black, Grey, Red, Chrome (see color chart below).

U1521 U1521EA

U1521 - Hand/Hair Dryer - push button activation, brushed satin stainless steel finish.

U1525EA - Hand/Hair Dryer - automatic, hands-free activation, brushed satin stainless steel finish.

Available voltages: 110-120, 220-240, 277

Available colors: Brushed satin stainless steel only.

All Jetair hand/hair dryers have:

Brushless Motors

All hands-free dryers have:

Adjustable timers

Adjustable depth of field sensors

MODEL	TYPE MOUNTING	NOZZLE	DRYING CYCLE	WATTS	LINE AMPS 110/120 208/230		CFM	RPM	HZ	TEMP OUTPUT
U1521	SURFACE	2 POS	30-50	2300	18	9	120	3450	60	130-140
U1521EA	SURFACE	2 POS	AUTO	2300	18	9	120	3450	60	130-140
U1525	SURFACE	2 POS	30-50	2300	20	10	130	3450	60	130-140
U1525EA	SURFACE	2 POS	AUTO	2300	20	10	130	3450	60	130-140
U1621	SEMI-REC*	2 POS	30-50	2300	18	9	120	3450	60	130-140
U1621EA	SEMI-REC*	2 POS	AUTO	2300	18	9	120	3450	60	130-140
U1625	SEMI-REC*	2 POS	30-50	2300	20	10	130	3450	60	130-140
U1625EA	SEMI-REC*	2 POS	AUTO	2300	20	10	130	3450	60	130-140

*Semi-Recessing Kit: Heavy gauge steel recessing box will convert a surface mounted dryer to semi-recessed. #8B bright stainless steel faceplate with louvers will provide a finished appearance for dryer. Dryer will not extend past 4” to comply with ADA code. Optional color faceplates to match cover are available as an option.
U020A: Kit for U1525 and U1525EA series.
U021A: Kit for U1521 and U1521EA series.

Color Options* for U1525 and U1525EA
White		Red
Beige		Grey
Almond		Black
*NEW!* Chrome (U1525 only)		Stainless Steel (U1521,U1523 only)

*Colors on this page may vary from actual dryer color depending on monitor settings. For a sample color swatch please contact us.

SPECIFICATIONS:

Motor: Brushless 3450 RPM, 1/8 HP motor. Protected by a special safety circuit breaker to eliminate over heating and burnouts. Motor is secured to base with special non-vibrating shock mounts.

Fan: Statically balanced to eliminate vibration and noise, directing air flow through heating element. Ambient temp. at nozzle is 70° F (21 °C)

Heating Element: 2300 watt nichrome coil, wound element on a state-of-the-art convective heating injection system that efficiently delivers warm air for drying.

Timer: Non-mechanical fully enclosed electronic timer with adjustable time cycle range. (30-50 seconds) Timer is adjusted to desired time during installation or can be changed any time after.

Electronic Sensor: Sensor activates dryer when sensor beam is broken and will continue to run until cycle is completed. Sensor is equipped with adjustable depth of field.

Cover: Fabricated of heavy duty die cast aluminum housing with baked white enamel finish. *(Check color chart for optional colors available for U1525, U1525EA Series)

U1521 – Fabricated of #18 gauge stainless steel with a #4 satin finish

Nozzle: Fabricated of die cast zinc alloy, chrome finish, with two positions. Standard dryer comes with fixed nozzle.

Base: One piece #14 gauge galvanized steel with 3/4" returns to wall surface for maximum strength and rigidity.

Hand Dryers Quantity Guide: High Traffic: 1 Dryer per basin. Average Traffic: 1 dryer per every 2 basins. Small Applications: 1 dryer for every 3 basins. Circular Wash Fountains: 4-5 Dryers per fountain.

Hand Dryers Location Guide: It is recommended when mounting hand dryers in high traffic areas (airports, sports arenas, etc...) to place dryers in such a way to create a flow from basin to dryer to exit. This will prevent congestion in the washroom. Dryers should be at least 2’-0” apart and a minimum of 12” from the basins. Dryers should not be mounted directly over basins.

<<Previous

Table of Contents

Next >>