UJ9–Single Robe Hook Strip. Strip is fabricated of type 304 #18 gauge stainless steel channel. Single robe hooks (UX110) are permanetly welded to strip for maximum strength.
UJ9A-16–16”L with 3 hooks
UJ9B-26–26”L with 4 hooks
UJ9C-36–36”L with 5 hooks

UJ10–Same as UJ9 with double hooks ( UX112) in lieu of single.
UJ10A-16–16”L with 2 hooks
UJ10B-26–26”L with 3 hooks
UJ10C-36–36”L with 4 hooks

UJ11–Extended Hat and Coat Hook Strip. Unit is fabricated of # 20 gauge stainless steel with all exposed surfaces pre-polished to a #4 satin finish. Strip has 1/2” returns to wall surface. UX116 hooks are fabricated of type 304 stainless steel.
UJ11A-26– 26” long with 3 hooks
UJ11B-36– 36” long with 4 hooks
UJ11C-46– 46” long with 5 hooks

 

UJ13–Mop Holder with Utility Shelf. Fabricated of #18 gauge type 304, 18-8 alloy stainless steel with all exposed surfaces prepolished to a #4 satin finish. Top of holder extendes 3-3/4” off wall to be utilized as a shelf. Lower portion of shelf to be extended to wall at an angle to provide additional strength. Two horizontal legs which form an integral part of holder and shelf are equipped with 1/4” mounting points.

UJ13A–24” with 3 holders
UJ13C–48” with 5 holders
UJ13B–36” with 4 holders
UJ13D–60” with 6 holders

 

UJ30–Utillty Shelf with Hook Strip. Shelf is fabricated of type 304 #18 gauge stainless steel with a #4 satin finish, 5”D. Hook strip is fabricated of type 304 #18 gauge stainless steel with single robe hooks (UX110). Brackets for shelf are permanently welded to shelf for maximum support. Shelf has ¹⁄₂” returns to prevent injury.

UJ30A–1616”L with 3 hooks
UJ30B–26 26”L with 4 hooks
UJ30C–36 36”L with 5 hooks

UJ31–Same as UJ30 with double hooks (UX112) in lieu of single hooks (UX110).
UJ31A–16 16”L with 2 hooks
UJ31B–26 26”L with 3 hooks
UJ31C–36 36”L with 4 hooks
 

UJ41–Utility Shelf, Mop Hook Strip and Rag Bar

Fabricated of #18 gauge type 304, 18-8 alloy stainless steel with all exposed surfaces pre-polished to a #4 satin finish. Shelf to be 8” off of wall and hemmed down 1-1/2”. Mop holders and hooks are fastened to front lip. #16 gauge stainless steel brackets are provided. A 1/4” stainless steel rod shall be provided between brackets to use as a rag bar. UJ41A–30” long, 3 mop holders and 2 hooks
UJ41B–36” long, 4 mop holders and 3 hooks
UJ41C–42” long, 5 mop holders and 4 hooks
UJ41D–48” long, 6 mop holders and 5 hooks  

 

UJ45–Shelf with Utility Hook & Mop Strip. Strip and shelf shall be fabricated of #18 gauge, type 304,18-8 alloy stainless steel with all exposed surfaces pre-polished to a #4 satin finish. A 15/8” lip shall be provided around top of shelf. The mop rack channel shall have edges returning 1/2” to wall and shall be formed of the same piece of stainless as the shelf and utility hook strip. UJ16 robe and towel hooks and UJ19 mop holders shall be riveted to hook strips.
UJ45A–34”W x 15-1/2”H x 8”D–3 mop holders and 4 robe & towel hooks
UJ45B–44”W x 15-1/2”H x 8”D–4 mop holder sand 5 robe & towel hooks
UJ45C–54”– 44”W x 15-1/2”H x 8”D–5 mop holder sand 6 robe & towel hooks

UJ15–Vacuum Hose Bracket. Fabricated of #18 gauge, type 304, 18-8 alloy stainless steel with exposed surfaces polished to a #4 satin finish. Front lip to be bent up to act as a retaining lip.
Overall Size: 6”W x 4”H x 3-1/4”D
 

UJ16–Heavy Duty Robe and Towel Hook. Fabricated of #14 gauge, type 304 stainless steel with all exposed surfaces polished to a #4 satin finish. Edges rounded to form a radius.
Overall Size: 1”W x 6-11/16”H x 2-1/8”D
 

UJ18–Pail or Ladder Hook. Fabricated of #14 gauge stainless steel reinforced hook with front

edge retaining lip. 2 mounting holes for 1/4” screws.
Overall Size: 1-1/4”W x 6-3/4"H x 8-1/4” off wall surface.
 

UJ19–Mop Holder. Fabricated of plated reinforced steel with a serated cam type hard rubber mop or broomholder. Holds handles 1/2"” to 1-1/4” in diameter.
 

UJ21–Clothes Hook. Fabricated of #11 gauge stainless steel with a #4 satin finish. Hook projects 1-1/4” from wall surface with front lip bent to act as retaining lip.
 

UJ22–Clothes Hook. Fabricated of #11 gauge type 304 stainless steel with a #4 satin finish. Hook projects 1-1/8” from wall surface.