<<Previous   Table of Contents   Next>>  
 
 
  ROLL TOWEL DISPENSERS
  
   


 U169A/199AJ
 		  
 

 

 

U169A/199AJ - Surface Mounted Roll Towel Cabinet with Mechanism. Cabinet is fabricated of type 304 stainless steel, with #18 gauge door with #4 satin finish. Mechanism can be adjusted to dispense 3 pre-set lengths of towel per stroke. Unit can hold one 8” or 9” wide roll of towels. Pin tumbler lock is keyed like all other A & J cabinets. One hand operational and complys with ADA code when properly mounted.
 Overall Size: 12-1/4”W x 16”H x 8-3/4”D (lever)

U169/199AJ-SR - Same as U169A/199AJ with welded semi-recessing flange.
Overall Size: 14-1/4"W x 18”H x 8-3/4”D (Lever)
Wall Opening: 12-1/2”W x 16-1/2”H x 3-1/2”D Extends 7” when semi-recessed from finished wall.
Max Size Roll Towel: 8”-9” wide x 7-7/8” O.D. for both style cabinets

 

  
   

U194
 		  
  U194–Surface Mounted Heavy Duty Household Roll Paper Towel Dispenser. Back and spindle are fabricated of die cast aluminum alloy. Antitheft spring loaded spindle cannot be removed until roll is empty. Controlled delivery of towels is standard. Free turning spindle is optional upon request.
Capacity: 1 standard roll household paper towels
Overall Size: 13”W x 1-3/4”H x 4” projection
 
  
   

U199AW
 		  
 

U199AW: Surface Mounted Roll Towel Dispenser. Lever activated cabinet fabricated of high impact white plastic with paper level viewer full width of cabinet. Lever requires less than 5 lbs of force and one hand operational.
Overall Size: 12”W x 15”H x 10-1/2”D (lever)
Capacity: One 8” or 9” wide roll. 

 

  
   

U199FL
 		  
 

U199FL: Surface Mounted Roll Towel Dispenser – Fabricated the same as the U199A with a full width lever at the bottom in lieu of a mid cover location. Unit provides one hand operation, no turning or twisting of wrist required with less than 3 Ibs. of force to activate. Unit complies with ADA code when mounted properly.
Overall Size: 10-1/2”W x 15-5/8”H x 8-5/8”D
Capacity: One 8” or 9” dia. roll.
 

  
   

 U199CP
 		  
  U199CP: Surface Mounted Center PullTowel Dispenser– Cabinet is fabricated of high impact ABS material with translucent cover. Towel is dispensed at bottom of cabinet and torn from roll by a concealed leading edge that prevents injury and premature tearing of towel. Ideal for service stations and factory washrooms. Unit complies with ADA code when mounted properly.
Overall Slze: 9-1/2”W x 12-3/8”H x 10”D
Capacity: One standard center pull paper towel roll.
 
  
   
 NEW! U199SC
U199SC

 		  
 

U199SC: Lever Operated Roll Towel Dispenser:

Surface mounted lever activated roll towel dispenser with a smoke color high impact plastic cover and one hand operation that complies with ADA code.
Overall Size: 10-5/8”W x 13-3/4”H x 9-5/8”D
Capacity: One standard roll towel 8” wide x 7-7/8”OD
 

  
 
HANDS FREE TOWEL DISPENSERS

 		  
   
U199HF

 		  
 

U199HF: Surface Mounted Hands Free Roll Towel Dispenser. Fabricated of steel back with translusent cover. Towel will be partially exposed to allow user to pull out a pre-determined amount of towel. Non-perforated towels are required. Concealed perforating mechanism and serrated tearing bar provide a safe and clean dispensing area. Manual control spool on side of unit is used for starting roll paper dispensing mechanism. Will dispense one standard 8” wide roll. Unit will comply with ADA code when mounted properly.
Overall Size: 10-1/2”W x 15-3/4”H x 8-3/4”D


 
  
 
NEW! U199EA


 U199EA

 		  
 

U199EA: Hands Free Roll Towel Dispenser. Towels are dispensed automatically when hands are placed below dispenser that activates motion-activated sensor. Pre-measured towel length is dispensed and will not dispense another until sensor field is re-set by moving hands away. Towels are not exposed and user touches nothing. Four (4) D-cell Alkaline batteries (4 required) are not included. Average use for alkaline batteries is 36000 hand drys. Smoke color cover allows a constant visual check on paper roll capacity.
Overall Size:10-1/2”W x 15-3/4”H x 8-3/4”D
Capacity: One standard roll 8"W x 8" dia. and a stub roll 2-3/4"


 
  
 

 

 

 <<Previous   Table of Contents   Next >>