US11—Surface Mounted Toilet Tissue Holder.

Tube is fabricated of Type 304 #18 gauge stainless steel, 1-1/4” diameter with a welded capped end. Flange is fabricated of type 304 #11 gauge (3” dia.) stainless steel with 3 exposed countersunk holes.
Overall Size: 5-1/2”H x 3-5/8”D
 

US15—Surface Mounted Security Shelf with Toothbrush Slots. Shelf is fabricated of type 304 #14 gauge stainless steel with a capacity to hold 4 toothbrushes.
Overall Size: 18”W X 2-9/16”H x 4”D
 

US21—Surface Mounted Soap Dish with Drain Holes, Concealed Mounting. Dish is fabricated of type 304 #7 gauge stainless steel, formed from a single piece of steel. Unit is equipped with 3 drain holes.
Overall Size: 5”W X 2-1/4”H x 2-13/16”D

US22— Same as above with exposed mounting.
 

U931: Heavy Duty Recessed Shower Seat. See page 18 for details.
 

Security Fasteners: Security type fasteners are available on request. Type wall application, length of fastener required and type headstyle must be supplied to order proper fasteners.
 

US17–Collapsible Hook. Bracket is fabricated of type 304 #11 gauge stainless steel. Hook is fabricated of type 304 #7 gauge stainless steel. Friction washers and tamper resistant spanner screw, adjust the amount of the tension required for hook to collapse.

Overall Size: 1”W x 4-5/16”H x 3”D
 

US18–Surface Mounted Collapsible Hook, Concealed Mounting. Hook is fabricated of type 304 #14 gauge stainless steel. All seams are tig welded and ground smooth. Pivoting balljoint releases when excessive force is applied.
Overall Size: 4”W x 4”H x 2-1/4”D
 
US19–Same as above with exposed mounting.
 

US74—Recessed Round Security Toilet Tissue Holder. Item is fabricated of type 304 #16 gauge stainless steel, drawn one-piece construction. Rim of holder is beveled to ensure a tight fit to wall.
Overall Size: 6-1/4”Dia. x 45/16”D
Wall Opening: 5-3/4”Dia. x 4-3/4”D
 

US80—Recessed Soap Dish. Unit is fabricated of type 304 #16 gauge stainless steel, drawn one-piece seamless construction. Outer edge has beveled edge to ensure a tight fit to wall.
Overall Size: 7”W X 5”H x 2-3/4”D
Wall Opening: 5-7/8”W X 3-7/8”H x 2-3/4”D

US130 –Security Grab Bar. Bars are fabricated of type 304, 1-1/2” dia. #18 gauge stainless steel with a #4 satin finish. Flanges are fabricated of type 304 #11 gauge stainless steel with 3 exposed mounting points. Closure plate is fabricated of type 304 #11 gauge stainless steel, welded in place to prevent injury and to conceal contraband.

Standard Bar Sizes: 12”, 18”, 24”, 30”, 36”, 42” & 48”

* US130 grab bar is designed for horizontal mounting.
 

US7408B: Security Stainless Steel Mirror. Mirror

with integral frame is fabricated of type 304 18-8 #20 gauge stainless steel with a #8 architectural bright finish. Exposed mounting points provide an easy installation. Fasteners are not included.
Overall Size: 11-1/4”W x 17-1/4”H
 

US7010 Series: Welded and polished angle frame is fabricated of type 304 18-8 #14 gauge stainless steel with a #4 satin finish. Concealed mounting style mirror is equipped with welded anchor bolts
.

US7011 Series: Same as US7010 security style framed mirror with exposed fasteners in lieu of concealed.

US888: Surface Mounted Security Toilet Tissue Holder– Unit is fabricated of type 304 #18 ga. stainless steel with a #4 satin finish on all exposed surfaces. 1¹⁄₄” dia. 18 ga. stainless steel tube acts as spindle with one end flared to prevent removal from cabinet. The other end of tube has two holes drilled to accommodate pad lock. *(Pad lock not included)
Overall Size: 5”W x 5-1/8”H x 4-3/16”D
Capacity: One standard size roll.