Toilet Seat Cover Dispensers & Combination Units.

Units are fabricated of #22 gauge, type 304,18-8 alloy stainless steel with a #4 satin finish on all exposed surfaces. Cabinet backs are fabricated of #22 gauge stainless steel. Flanges are of one piece seamless construction without miters. Returns are 1/4” to wall. Units are theft-resistant by means of a commercial quality pin tumbler lock, keyed like all other A&J units.
 

U850–Recessed Toilet Seat Cover Dispenser. Capacity: 500 single or half fold seat covers
Overall Size: 17-1/4”W x 12-3/4”H x 2-5/8”D
Wall Opening: 15-3/4”W x 11-1/4”H x 2-3/8”D
 

U8504: Recessed Uni-Door Seat Cover Dispenser.

(Not Shown)
Overall Size: 17-1/2”W x 13-1/4”H x 2-5/8”D
Wall Opening: 15-3/4”W x 11-1/4”H x 2-1/8”D
Capacity: 500 single half fold seat covers

 

U851–Surface Mounted Toilet Seat Cover Dispenser. Unit has a concealed opening for filling.
Capacity: 500 single or half fold seat covers
Overall Size: 15-3/4”W x 11”H x 1-3/4”D
 

U852–Partition Mounted Dual Toilet Seat Cover Dispenser.
Capacity: 500 single or half fold seat covers for each dispenser– total capacity: 1000
Overall Size: 17-1/4”W x 12-3/4”H
Partition Opening: 15-1/2”W x 11-1/4”H; adjustable for partitions 1/2” to 1" thickness
 

UP853: Surface Mounted Toilet Seat Cover Dispenser-Unit is fabricated of high impact white ABS material.
Overall Size: 16”W x 11”H x 3-1/4”D
Capacity: 500 seat covers.

 

Triple Roll Dispensers:  The industry standard for combination units (Seat cover, toilet tissue and napkin disposals) for toilet tissue capacity is two rolls per stall.  The A&J line U860 series has the two roll per stall capacity.
The U8603 Series is fabricated with a three toilet tissue roll capacity.  Both two and three roll combination series are fabricated of the same stainless steel material and are available recessed, surface mounted and partition mounted (two stall) installation.
The "Three Roll Design" reduces the time the janitorial services spend filling tissue dispensers.

 

U860-Recessed Toilet Seat Cover Dispenser, Toilet Tissue Dispenser and Sanitary Napkin Disposal.  Napkin disposal is located below push panel and is removable for servicing.  Spring loaded toilet paper dispenser accommodates all standard core rolls.
Overall Size: 17-1/4"W x 32-3/4"H x 4-1/4"D
Wall Opening: 15-3/4"W x 31-1/4"H x 4"D

Capacity: Toilet Tissue: 2 standard rolls, 5-1/2" O.D. max.

                Toilet Seat Covers: 500 seat covers
Waste Capacity: 2 gallons

U860A-Recessed Toilet Seat Cover Dispenser and Toilet Tissue Dispenser.  Same as U860, except napkin disposal and waste receptacle are blanked off for use in men's washrooms.

U861-Partition Mounted Toilet Seat Cover Dispenser, Toilet Tissue Dispenser and Sanitary Napkin Disposal.
Overall Size: 17-1/4"W x 32-3/4"H x 4-1/4"D
Partition Opening: 15-3/4"W x 31-1/4"H; adjustable for partitions, 1/2" to 1-1/4" in thickness.
Capacity: Toilet Tissue: 4 standard rolls, 5-1/2" O.D. max.
                Toilet Seat Covers: 500 each side
Waste Capacity: 2 gallons

U861A-Partition Mounted Toilet Seat Cover Dispenser/Toilet Tissue Dispenser. Same as U861, except napkin disposal is blanked off for use in men's washrooms.
 

U861H–Same as the U861 except one flange is flush mounted to allow grab bar installation across the front of cabinet below toilet seat cover dispenser.
 

U861AH–Same as the U861A except one flange is flush mounted to allow grab bar installation.

*Units that  are fabricated to accommodate grab bar installation, do not come with bar. Must be ordered separate.
 

U864
 

U864–Recessed Dual Roll Toilet Tissue Dispenser and Sanitary Napkin Disposal.
Overall Size: 17-1/4”W x 20”H x 4-1/4”D
Wall Opening: 15-3/4”W x 18-1/2”H x 4”D
Capacity: 2 standard rolls, 5-1/2” O.D. max.
Waste Capacity: 2 gallons (.26 cu.ft.)
 

U865                     U865A

U865–Partition Mounted Dual Roll Toilet Tissue Dispenser and Sanitary Napkin Disposal.
Overall Size: 17-1/4”W x 20”H x 4-1/4"D
Partition Opening: 15-7/5”W x 18-1/2”H; adjustable for partitions1/2” to 1-1/4” in thickness.
Capacity: 4 standard rolls, 5-1/2” O.D. max.
Waste Capacity: 2 gallons (.26 cu.ft.)
 

U865H–Same as U865 except one flange is flush mounted to allow grab bar installation.

U865AH–Same as U865H except napkin disposal is blanked off for installation in men’s washrooms.
 

U8603A

U8603A: Recessed Seat Cover Dispenser and Toilet Tissue Dispenser. Blanked off napkin disposal area for installation in men’s rooms. Fabricated the same as the U860 with three toilet tissue roll capacity in lieu of two. Overall Size: 17 1/4”W x 32 3/4”H x 4 1/4”D
Wall Opening: 15 3/4”W x 31 1/4”H x 4”D
Capacity: Toilet tissue: Three standard rolls,  5-1/2"OD max.
                Seat Covers: 500